TImekeeper is specially designed to be compatible with Heirloom 12 volt towel warmers (Strata single rails, Poles, and Low Voltage ladders) but is also suitable for all other Heirloom towel warmers (except ESP models).

The Timekeeper is installed behind the power switch and can therefore be installed retrospectively to already installed towel warmers. The Timekeeper must be installed by a registered electrician. 

The Timekeeper turns the towel warmer on and off twice per day, with a continuous repeating cycle where the towel warmer is on for 4 hours and then off 8 hours. Once the Timekeeper is installed , your towel warmer will operate only with the above continuous cycle.

The 8 hour cycle can be reset by switching the warmer off and then the cycle will operate from when the warmer is next switched on.

The Timekeeper controller is supplied with a small decal to be placed on the faceplate of the power switch. It is important that the decal is applied so as to inform electricians and future occupants that a timer is in place.

The Timekeeper is intended to run continuously and control the power supply to the towel warmer. Do not regularly turn the unit off and on.

IMPORTANT: The Timekeeper must not be installed with Heirloom ESP towel warmers